|
WARNING:
Using Tips n Tricks on this website incorrectly can cause serious problems
that may require you to reinstall Operating System. We cannot guarantee that
problems resulting from the incorrect use of Tips and Tricks can be solved.
Use Tips and Tricks at your own risk.
Reduce interference on your wireless network
One
of the biggest reasons for wireless interference is the use of 802.11g or
802.11b networks and 2.4GHz cordless phones. Router for those networks and
2.4GHz phones operate in the same frequency, and they're competing with each
other. This is exacerbated by the fact that they're in the same room.
Interference from wireless products in the 2.4GHz frequency is a known issue
for 802.11g/b networks; even baby monitors and microwave ovens have been
known to wreak havoc on Wi-Fi networks.
You can try a number of things for free, or you can pony up for a new phone.
First off, try moving the phone's base unit into a different room from your
router/access point. Also, try switching channels on router/access point. If
these suggestions don't work, you can invest in a cordless phone that uses a
different frequency than your wireless network: 900MHz or 5.8GHz.
Set up wireless file and printer sharing
Here’s how to set up file and printer sharing on a wireless network so that
these shared resources can be available to all printers on the network. This
lesson pertains primarily to Windows XP. For other versions of Windows,
click
here. For Mac instructions, click
here.
How to set up printer sharing
Go to the PC the printer is plugged into and open Control Panel > Printers
and other Hardware > View installed printers or fax printers, and click on
your printer. From there open the Printer menu and click on Sharing. From
there click Share this printer, then click OK.
How
to add a network printer
Do
the following on each of the other PCs on your network: open Control Panel >
Printers and Faxes and click Add a printer. This will take you into a wizard
to find the printer you shared previously. Click Next until you are at the
Local or Network Printer page. Select ‘A network printer or a printer
attached to another computer, and click Next. Now click Browse for a
printer’ and click Next. This will display your workgroup, the PCs connected
to it and any printers that are attached to them. Click on the one you
shared earlier and click Next. This should install the driver automatically.
If not, you may need to get the CD that came with the printer. Now click Yes
for that to be the default printer for this PC (or no if it already has one
attached). Click Finish.
Troubleshooting
Both this PC and the one it’s attached to might need a reboot. If you’re
not seeing the PC it’s attached to, double-check that all PCs have the
same network name. (Control Panel > Performance & Maintenance > See
basic information about your computer. From there click on Computer
Name. Your workgroup is displayed.) If you’re not seeing the printer,
make sure it’s switched on. If it still doesn’t work, you may need to
install the printer driver using the CD.
Glossary
Here are a few glossary words which will help you:
Workgroup name: This is the name of your network if you like. By default
Windows XP will call your workgroup MSHOME, but you can change this as
long as all the PCs on your network have the same workgroup name. (To
see the computers in your network, click My Computer and choose Network
Places from the bar on the left side. From there click View Workgroup
Computers.)
Permissions: If you are a more advanced user you may prefer to set up
file permissions. These are sharing rules that can be set for each
folder that use the system of Windows usernames and passwords (if you
don’t type in a password when you switch on, you probably won’t know
what I mean, so to learn about user accounts go to Control Panel, then
Users, and look under Learn about on the left.) Unless you’re a
confident Windows user (and you like reading through the help
documents!) it’s probably best to stick to simple file sharing.
Network printer: A printer that is shared among computers on a network.
It is physically attached to one of the PCs, which must be switched on
for anyone to use the printer.
|